Working Voltage | 208 - 240 VAC, 50/60 Hz, Single Phase |
Max. Power Consumption | 5 KW ( 50A Air breaker required ) |
Slot Die Coating | The slot die is perfect for uniform film coating of 1 micron and up to 300-micron thickness. By changing the shim size with various patterns, you would be able to produce continuous, intermittent, or even grid coatings that match the shim patterns. |
Slurry Feeding Pump | · Slurry feeding screw pump with 4 liters tank is included · 24DC Input, 500W · 0.5~0.8MPa compress gas is required. · Slurry feed rate: 0.1-150 rpm (or 0.023 - 34.5 mL/min) · Stirring speed: 27 rpm |
Shim (Spacer) | 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm & 0.8mm thick shims are included for producing films with various thickness. |
Max. Coating Width | 250 mm |
Max. Coating Length | Depends on the coating and substrate thickness. Typically, 10um thick foil with 100um coating can get 600 meters of electrode length coated per run. |
Coating Speed | 0-800 mm / minute |
Minimum Thickness & Precision | 1 µm ±1% (dried film ) |
Max. Drying Temperature | 150°C
|
Heating | Forced convection hot air (IR+UV heating is available upon request) |
Temperature Accuracy | ±1°C |
Heating Zone Length | 710mm (28") |
Reeling/Unreeling Shaft | 75mm (ID) |
Max. Reeling/Unreeling Diameter | 250mm (OD) |
Compressed Air | 0.5-0.8 MPa (Air compressor not included. ) |
Product Dimensions | Coater: L1750 mm*W 950 mm*H 1060 mm
Slurry Feeding Pump: W 660*D 200*H 660 mm |
Net Weight | 1000 kg (2200 lbs) |
Warranty | · One Year limited warranty with lifetime support · Rusting and damage due to improper storage condition or maintenance are not covered by warranty |
