This device is a micrometer grade desktop programmable dip coater (1-500 um/sec) with "touch-screen" digital control. Dipping rate, pulling rate, dwell time, and cycle life can be set up by touch screen controller and run dip coating automatically in the temperature controllable oven.
Micron range constant temperature automatic programmable dip coater is designed to pull the coating film in the liquid phase and grow the film by vertically pulling the sample in the liquid phase. This machine adopts PLC program control system, with color touch screen as data input and output end, showing parameters such as pulling speed, lifting height, lifting round trip times and interval time. This machine is equipped with a constant temperature drying oven to make the film growth process at a constant temperature and to facilitate the curing of the film.
110/220V AC selectable
0-60 mm Adjustable
1-500 um/sec Programmable with accuracy within +/- 0.05%
6" LCD color touch screen controller
Two screw sample clips are installed in the sample holder in order to carry the samples sliding up and down through two guide rods
One 150mL beaker is included
The beaker which contains the coating material (coating solution) will be placed into the slot of the beaker holder.
Max. Sample Size
Less than 250g
1.Working Voltage: 110/220V AC selectable in Personalization
2.Max. Power Consumption: 600W
3.Temperature: 50-100°C controlled by digital controller with +/- 1°C accuracy.
4.Chamber Dimensions: 280mm(L)×280mm(W)×280mm(H)
5.Inner Material: Stainless Steel
6.Product Dimensions: 406mm(L)×406mm(W)×610mm(H)
One year limited with lifetime support