Large tape casting coater is a 300mm width and 1000mm long tape casting coater with the heatable vacuum chuck up to 100°C, and micrometer adjustable applicator. It is designed for producing the long thick film and has a unique driving system to produce smooth coating at all types of materials.
Large tape casting coater uses a vacuum chuck and an oil-free vacuum pump to adsorb the fixed substrate, so that the substrate is free from wrinkles during the coating process, thereby making the coating more uniform and smooth, and preventing the contamination of the substrate by the oil in the vacuum pump.The width of the film during the working process of the Heated vacuum doctor-blade film coater can be controlled according to the width of the film forming blade. The baffle in the middle of the blade can be moved left and right. When the baffle and the side of the blade completely overlap, the film width reaches the limit.It is specially designed for coating various electrodes of cylindrical cell such as the 21700 format.
· 208V - 240V AC, single phase, 50/60Hz
10-1000mm adjustable by using Adjustable Position Switch
Aluminum alloy flat vacuum chuck
Vacuum chuck Dimensions: 1100mm(L) x 350mm(W) x 25mm(H)
1.This coater includes a clear acrylic protective cover.
2.A fume exhaust port is assembled with the cover on the left upper corner
3.Dimension of the port: OD 80mm, ID 68mm, Height 60mm
· Built in pushing bar for using micrometer adjustable applicator.
· 300 mm width Applicator with micrometer adjustable head included making coating up to 1000mm(L) x 300mm(W)
Heating Vacuum Bed
1.Bottom Heated vacuum chunk
2.Max. working power: 2000W
3.Max. heating temperature: 100°C
4.Precision temperature controller with +/- 1ºC accuracy.
Tip: For drying the coated Li-ion battery electrode sheets (usually 80C is required), simply set the target temperature in the temp. controller, close the lid and wait for the slurry to be dried.
Max. Coating Area
1340mm(L)×580mm(W)×920mm(H) (Max Height)
One Year limited with lifetime support