Faster battery electrode roll to roll transfer coating system

Faster battery electrode roll to roll transfer coating system is perfect for prototypes of new generation rechargeable batteries.It is integrated with the functions/ features of metallic foil roll unwinding (reeling out), slurry feeder, coating blade, baking oven, and final electrode winding (reeling in) together with touch screen operation for customer's utmost convenience.

Inquire Now Next Product

Faster battery electrode roll to roll transfer coating system is specially used for the surface coating of foils. It adopts PLC and human-machine control system, and humanized Chinese and English switchable operation interface. The machine adopts three-roll transfer coating, which can coat the surface of the substrate with a very uniform thin coating and is automatically dried by the drying system; continuous and intermittent coating can be applied during coating.

Faster battery electrode roll to roll transfer coating system specifications:

Working Voltage	· 208 -220V, 50/60 , 3 phases, ( standard ) · 380V, 50/60 Hz, Three Phase ( optional) · 460V, 50/60 Hz, Three-Phase available upon request
Max. Power Consumption	30 KW ( 100A Air breaker required )
Coating Method	Transfer coating method for better density and uniformity
Max. Coating Width	400mm
Coating Speed	Max. 4 meter / minute
Thickness Precision	± 3µm (± 5µm at edges)
Max. Drying Temperature	150°C
Temperature Accuracy	±1°C
Heating Zone Length	4.5 Meter (3 zones, 1.5 meters per zone)
Reeling/Unreeling Shaft	75mm (ID)
Max. Reeling/Unreeling Diameter	250mm (OD)
Max. Coating Length	Depending on coating and substrate thickness. Typically, 10um thick foil with 100um coating can get 600 meters of electrode length coated per run
Slurry Stirring	SS316 Moving Rod
Compressed Air	0.5-0.8 MPa (Air compressor not included.)
Net Weight	1000 kg
Warranty	One Year limited warranty with lifetime support. Rusting and damage due to improper storage condition or maintenance are not covered by warranty.