Auto-drying tape casting film coaters is is widely used in various high-temperature film research, such as ceramic film, crystal film, battery material film, special nano film; it can adapt to the development of film science and technology in the future under high-temperature conditions.
Main features of auto-drying tape casting film coater:
1. The coating speed can be adjusted within the range of 0-100mm / S;
2. Drying system with digital display temperature control, the maximum working temperature is 200 ℃;
3. The stroke can be adjusted by the stroke switch between 10-250mm;
4. Vacuum aluminum disk, which can quickly place or remove the substrate;
5. With adjustable film applicator;
Technical parameters of auto-drying tape casting film coater:
Coating speed | 0～100mm/s |
Maximum stroke | 250mm |
Vacuum plate | aluminum plate with vacuum |
Vacuum plate size | 365mm(L)×200mm(W)×30mm(H) |
Adjustable range of film applicator | 0.02～3.5mm |
Heating and drying system | room temperature ~ 200 ℃, digital temperature controller, accuracy ± 1 ℃ |
Power supply | 220V/50Hz |
Weight | 50KG |
Dimension | 500mm(L)×310mm(W)×330mm(H) |
Optional accessories | Micron adjustable film applicator 50-150 mm wide, width can be specified according to requirements |
Disclaimer: The product introduction content (including product images, product descriptions, technical parameters, etc.) of this site is for reference only. As the update may not be timely, there will be some differences between the content and the actual situation. Please contact our sales staff to confirm. The information provided on this site does not constitute any offer or promise, and the company will periodically improve and modify the website information, without prior notice, please understand.
